How To Reduce Pool Water Flow Without Replacing the Pump

How To Reduce Pool Water Flow Without Replacing the Pump

Written by Catherine Zhou on Oct. 31st 2023

Every pool owner knows the importance of a pool pump in maintaining the health and clarity of their pool water. Jedoch, there are times when the flow from the pump might be more than necessary, leading to wasted energy and potential wear on the equipment. In this guide, we’ll explore ways to reduce your pool pump’s flow without replacing the entire pump.

At its core, a pool pump circulates water from the pool, through the filter, and back into the pool. The flow rate, measured in gallons per minute (GPM), indicates how much water the pump circulates. Several factors, including the pump’s size, design, and settings, influence this rate.

Benefits of reducing pool pump flow are as below

Energy Savings and Cost Reduction: A reduced flow means the pump works less, saving energy and reducing your electricity bill.

Extended Equipment Lifespan: Less strain on the pump can extend its lifespan.

Improved Water Quality: Proper flow ensures efficient filtration and better water circulation.

Methods to Reduce Pool Pump Flow

Adjusting the Pump’s Settings

Most modern pumps come with adjustable speed settings. If you have a variable-speed pump, simply reduce the RPM to decrease the flow. For dual-speed pumps, switching to the lower speed can help.

If your pump is single speed, you can reduce the size of the impeller, sourcing a proper impeller is a good way, if new impeller is not available, you may take out the current impeller and reduce the diameter of the impeller by grinding with a tool. Usually the width of the impeller influences pump flow and the diameter of the impeller influences pump lift and flow, so reducing the diameter of the pump will also reduce the lift.

Installing a Bypass Valve

A bypass valve allows a portion of the water to return to the pool without passing through the filter, effectively reducing the flow. Install the valve after the pump and adjust it to achieve the desired flow.

Using a Flow Control Valve

This valve, installed on the return line, lets you control the amount of water returning to the pool. By adjusting this valve, you can manage the flow rate effectively.

Adjusting the Return Jets

Return jets push water back into the pool. By angling them differently or partially closing them, you can influence the flow rate.

Reducing your pool pump’s flow can lead to significant benefits, both in terms of cost savings and equipment longevity. With the methods outlined above, you can achieve an efficient flow rate without the need for a pump replacement.

DoE-konformer Max Power Eco

DoE-konformer Giant Force Pro

Conclusion

Selecting the right pool pump manufacturer is a pivotal decision that affects not just the quality of your projects but also your profitability. The manufacturers listed above offer a variety of options to meet diverse needs and budgets. Whether your focus is on energy efficiency, cost, or customer service, there’s a manufacturer on this list that aligns with your business goals.

This article aims to serve as a comprehensive guide for professionals in the pool industry, helping you make informed decisions that can positively impact your business. With this information at your fingertips, you’re well-equipped to navigate the complexities of sourcing high-quality pool pumps as well as a reliable partner of pool pump manufacturer.

© 2023 Alle Rechte vorbehalten.

Navigating the Best: Your Ultimate Guide to the Top 10 Pool Pump Manufacturers in China

Navigating the Best: Your Ultimate Guide to the Top 10 Pool Pump Manufacturers in China

Written by Catherine Zhou on Oct. 8th 2023

Introduction

In the competitive landscape of pool maintenance and equipment, the difference between success and failure often boils down to the quality of your suppliers. For pool contractors, equipment buyers, and distributors, the pool pump is the linchpin of any swimming pool system. With a multitude of manufacturers to choose from, the selection process can be overwhelming. That’s why we’ve compiled a list of the top 10 pool pump manufacturers in China that should be on your radar for your next big project.

1. Hayward Industries, Inc.

Basic Information:

Hayward Industries, Inc. is headquartered in Berkeley Heights, New Jersey, Vereinigte Staaten von Amerika. The company specializes in the manufacturing and distribution of swimming pool equipment and associated automation systems. Their pool pumps production branch is based in Changzhou, Jiangsu, China.

Hauptprodukte:

Hayward’s product range is extensive, covering pool pumps, filters, heaters, cleaners, lights, salt chlorine generators, and automation solutions to control all the equipment. Pool pumps are a significant part of Hayward’s product portfolio.

Target Customer Group:

Hayward primarily targets residential pool owners but also serves commercial pools, Spas, and water features. Their products are suitable for both new pool constructions and renovations.

Company History:

Founded in 1923, Hayward has been in the industry for nearly a century. Initially, they started as a specialty metal company but transitioned into the swimming pool equipment business. Over the years, they have acquired several other companies to expand their product offerings and global reach.

Strengths:

Quality and Reliability: Hayward is known for producing high-quality, durable products that are built to last.

Innovation: The company invests heavily in R&D to bring innovative products to the market, such as energy-efficient pumps and advanced automation systems.

Brand Recognition: Being one of the oldest players in the market, Hayward enjoys strong brand recognition and customer loyalty.

Extensive Distribution Network: With a wide network of dealers and distributors, Hayward products are easily accessible globally.

Weaknesses:

Price Point: Hayward products often come at a premium price, which may not be suitable for all customer segments.

No OEM service: Hayward is a name brand in pool industry, all the distributors should sell their products based on brand name of “Hayward”, this seems not suitable for those who want to create their own brand, if you are looking for a pool pump factory that can provide with OEM service, the second factory maybe suitable for you.

2. Ningbo Jade Pool Technology Co., GmbH.

Basic Information:

Headquartered in Ningbo, China, Jade operates with four state-of-the-art production lines. Specializing in pool pumps, sand filters, and pump motors, the company has carved a niche for itself in the international B2B market.

Hauptprodukte:

Jade’s product line is renowned for its top-quality, energy-saving, and cost-efficient pool pumps and sand filters.

Target Customer Group:

The brand primarily caters to pool contractors, equipment buyers, and distributors all over the world.

Company History:

Founded in 2013, Jade has consistently focused on innovation and quality, making it a go-to choice for industry professionals. This factory is younger than Hayward who has been in the pool industry for nearly a century, but Jade focus on pool pumps for 10 years with awesome technical team from North America. Jade doesn’t just manufacture pool pumps, they specialize in them. With a laser focus on pool pump technology, they’ve dedicated a decade to perfecting these essential components of your pool system. Their 10 years of specialized experience isn’t just a number; it’s a testament to their expertise, innovation, and commitment to quality. While others diversify, Jade digs deep. All Jade team understand that a pool pump is the heart of any swimming pool, and that’s why they’ve engineered their pumps to be the most reliable, energy-efficient, and cost-effective on the market. Their deep-rooted expertise in pool pumps gives us a unique edge, allowing them to offer products that are not only top-quality but also tailored to the specific needs of our B2B clients like pool contractors, equipment buyers, and distributors. Choose Jade, and you’re not just choosing a pool pump; you’re choosing a decade of specialized excellence.

Strengths:

High-quality products, energy efficiency, competitive pricing and long-term customer support make Jade a reliable partner.

Weaknesses:

Limited product range compared to some competitors.

工厂照片3

3. Ningbo Splash Pool Appliance Co., GmbH.

Basic Information:

Ningbo Splash Pool Appliance Co., GmbH. is a China-based company located in Ningbo, Zhejiang Province. The company specializes in the manufacturing and distribution of swimming pool appliances and accessories.

Hauptprodukte:

Ningbo Splash primarily focuses on swimming pool equipment, including but not limited to pool pumps, filters, heaters, and pool cleaning accessories.

Target Customer Group:

The company targets a diverse customer base, including residential pool owners, commercial pool operators, and B2B clients such as pool contractors, equipment distributors, and pool maintenance companies.

Company History:

Ningbo Splash was transformed from a plastic factory to a pool accessory factory, so they have advantages in plastic products rather than pool pumps with key parts of motor. The company has been in the pool appliance industry for several years, gaining expertise and market share in Mexico, Vereinigte Staaten von Amerika, China and potentially other markets.

Strengths:

Product Range: Ningbo Splash offers a comprehensive range of pool equipment, making it a one-stop-shop for pool needs.

Competitive Pricing: Being based in China allows the company to offer cost-effective solutions.

Local Market Expertise: With a strong understanding of the Chinese market, Ningbo Splash has a competitive edge in local and regional sales.

Weaknesses:

Global Brand Recognition: Ningbo Splash may lack the global brand recognition that some of its competitors enjoy.

Quality Consistency: Ensuring consistent quality across a wide range of products can be a challenge.

Customization: With an expansive factory floor and multiple production lines, Ningbo Splash has the ability to produce a wide range of pool products. Jedoch, it’s important to note that their large-scale operations are optimized for high-volume production, which can limit their flexibility in catering to clients with custom requirements, especially for orders that are not in high volume. While they excel in delivering standardized solutions, they may face challenges in quickly adapting to specialized, low-volume needs.

4. Guangdong Lingxiao Pump Industry Co., GmbH.

Basic Information:

Guangdong Lingxiao Pump Industry Co., GmbH. is a China-based company specializing in the manufacturing of various types of pumps, including water pumps and pool pumps. The company is located in Guangdong Province, one of China’s industrial hubs.

Hauptprodukte:

The company offers a wide range of pumps, including centrifugal pumps, submersible pumps, sewage pumps, and swimming pool pumps. Their product line is designed to cater to both residential and industrial applications.

Target Customer Group:

Guangdong Lingxiao targets a broad customer base, ranging from residential homeowners to industrial clients. They also serve B2B customers like contractors, equipment distributors, and companies involved in water treatment and sewage management.

Company History:

Guangdong Lingxiao has been in the pump manufacturing industry for several years, gaining experience and expertise in pump technology.

Strengths:

Product Diversity: The company offers a wide range of pump types, catering to various needs.

Local Market Knowledge: As a China-based company, they have a deep understanding of the local and regional markets.

Weaknesses:

Brand Recognition: Compared to global leaders in the pump industry, Guangdong Lingxiao may have lower brand recognition.

Limited Global Reach: While they may have a strong presence in China and some parts of Asia, their global distribution network could be limited.

Quality Consistency: As with many product lines, maintaining consistent quality across a diverse product range can be challenging.

Limited knowledge in pool industry: since pool pump is only a small proportion in their pump business, they may not pay much attention to fully understand the pool industry’s needs.

5. LeoPump Group

Basic Information:

LeoPump is a China-based company headquartered in Wenling, Zhejiang Province. The company specializes in the design, manufacturing, and distribution of various types of pumps, including water pumps and pool pumps.

Hauptprodukte:

LeoPump offers a diverse range of pumps, such as centrifugal pumps, submersible pumps, garden pumps, and swimming pool pumps.

Target Customer Group:

The company serves a wide array of customers, including residential, commercial, and industrial clients.

Company History:

LeoPump was established in 2001, they have expanded their market reach both domestically and internationally over the years.

Strengths:

Product Diversity: LeoPump offers a wide variety of pump types, catering to different needs and applications.

Global Reach: LeoPump has a strong distribution network that extends beyond China, making their products accessible worldwide.

Weaknesses:

Brand Recognition: While LeoPump is a strong player in China, it may lack the global brand recognition that some competitors enjoy.

Customization Limits: The company’s focus on mass production may limit its ability to offer highly customized solutions for smaller clients.

Price Point: Depending on the market and product, LeoPump’s pricing may not be as competitive as other manufacturers who operate at a lower cost.

Quality Consistency: As with many product lines, maintaining consistent quality across a diverse product range can be challenging.

Limited knowledge in pool industry: since pool pump is only a small proportion in their pump business, they may not pay much attention to fully understand the pool industry’s needs.

6. Junhe Pumps Holding Co., GmbH.

Basic Information:

Junhe Pumps Holding Co., GmbH. is a China-based company that specializes in the manufacturing and distribution of various types of pumps. The company is located in one of China’s industrial regions–Ningbo, Zhejiang, China, offering a wide range of pumping solutions.

Hauptprodukte:

Junhe Pumps offers a diverse product line, including centrifugal pumps, submersible pumps, sewage pumps, and pool pumps.

Company History:

The company has been in the pump manufacturing industry for several years, gaining experience and market share primarily in the domestic Chinese market.

Strengths:

Product Range: Junhe Pumps offers a comprehensive range of pump types, catering to various market needs.

Local Market Expertise: Being based in China, they have a deep understanding of local market dynamics and customer needs.

Cost-Effectiveness: Their China-based operations allow them to offer competitive pricing.

Weaknesses:

Global Brand Recognition: Junhe Pumps may not have strong brand recognition outside of China.

Limited Global Distribution: While they may have a strong domestic presence, their international distribution network could be less extensive.

Customization Limits: The company’s focus on mass production may limit its ability to cater to specialized, low-volume customer needs.

Some companies may opt for shortcuts to reduce production costs, but this often leads to compromised product integrity and reliability.

7. Sunsun Group Co., GmbH.

Basic Information:

Sunsun Group Co., GmbH. is a China-based company headquartered in Guangdong Province. The company specializes in the manufacturing and distribution of various types of pumps and aquarium equipment.

Hauptprodukte:

Sunsun Group offers a diverse range of products, including submersible pumps, centrifugal pumps, pool pumps, and aquarium equipment such as filters and air pumps.

Target Customer Group:

The company serves a broad customer base, including residential aquarium owners, commercial pool operators, and B2B clients like contractors, equipment distributors, and pet supply stores.

Company History:

Sunsun Group was established in 1985, it is well known for the aquarium equipment industry in China. They mainly serve domestic market and mainly focus on aquarium equipments, pool pump is only a small proportion of their product lines.

Strengths:

Product Diversity: Sunsun Group offers a wide variety of pump types and aquarium equipment, catering to different market needs.

Innovation: Sunsun Group invests in R&D to keep their product offerings up-to-date with technological advancements.

Gains a big market share in aquarium industry in China: The company has a strong distribution network, making their products accessible all over China.

Weaknesses:

Brand Recognition: While Sunsun Group is a strong player in China and the aquarium market, it may lack global brand recognition in the broader pump industry.

Niche Focus: The company’s strong focus on aquarium equipment may limit its expertise in other types of pumps, such as pool pumps.

haolide

8. Zhoushan Haolide Pump Industry Co., GmbH.

Basic Information:

Zhoushan Haolide Pump Industry Co., GmbH. is a China-based company located in Zhoushan, Zhejiang Province. The company specializes in the manufacturing and distribution of various types of pumps, including water pumps and industrial pumps.

Hauptprodukte:

The company offers a range of pumps, such as centrifugal pumps, submersible pumps, and sewage pumps. They may also produce specialized pumps for specific industrial applications.

Target Customer Group:

Zhoushan Haolide targets a wide range of customers, including industrial clients, commercial enterprises, and B2B clients like contractors and equipment distributors.

Company History:

The company has been in the pump manufacturing industry for several years, gaining experience and market share primarily in the domestic Chinese market.

Strengths:

Product Range: The company offers a comprehensive range of pump types, catering to various industrial and commercial needs.

Local Market Expertise: Being based in China, they have a deep understanding of local market dynamics and customer needs.

Weaknesses:

Global Brand Recognition: Zhoushan Haolide may not have strong brand recognition outside of China.

Limited Global Distribution: While they may have a strong domestic presence, their international distribution network could be less extensive.

Limited pool pump type: Pool pump is a small proportion of their products, they mainly produce pool pumps for 220v/50hz power supply, it seems they don’t have products for 115v/60hz and 230v/60hz voltage regions/Countries.

9. Nanfang Pump Industry Co., GmbH.

Basic Information:

Nanfang Pump Industry Co., GmbH. is a China-based company headquartered in Hangzhou, Zhejiang Province. The company specializes in the design, manufacturing, and distribution of various types of pumps, including water pumps and industrial pumps.

Hauptprodukte:

Nanfang Pump offers a diverse range of pumps, including centrifugal pumps, submersible pumps, sewage pumps, and chemical pumps. They also provide pump control systems and accessories.

Target Customer Group:

The company serves a broad customer base, including industrial and commercial sectors, as well as B2B clients like contractors, equipment distributors, and companies involved in water treatment and chemical processing.

Company History:

Nanfang Pump Industry Co., GmbH. was established in 1989 and has rich experience to produce industrial pumps. They have expanded their market reach both domestically and internationally over the years.

Strengths:

Product Diversity: Nanfang Pump offers a wide variety of pump types, catering to different industrial and commercial needs.

Qualitätskontrolle: The company is known for its stringent quality control measures, ensuring reliable and durable products.

Innovation: Nanfang Pump invests in R&D to keep their product offerings up-to-date with the latest technological advancements.

Weaknesses:

Customization Limits: The company’s focus on mass production may limit its ability to offer highly customized solutions for specialized needs.

Price Point: Depending on the market and product, Nanfang Pump’s pricing may not be as competitive as other manufacturers who operate at a lower cost.

Limited pool pump type: They mainly produce pool pumps for 220v/50hz power supply. They don’t quite focus on deeply cultivating in the swimming pool industry since pool pump is only a small proportion of their product lines.

10. Lingya Swimming Pool Water Treatment Equipment Co., GmbH.

Basic Information:

Lingya Swimming Pool Water Treatment Equipment Co., GmbH. is a China-based company specializing in the manufacturing and distribution of swimming pool water treatment equipment.

Hauptprodukte:

Lingya offers a range of swimming pool equipment, including pool pumps, filters, heaters, and water treatment systems such as chlorinators and ozonators.

Company History:

Lingya has been in the swimming pool equipment industry for several years, gaining experience and market share primarily in the domestic Chinese market. The company is located in one of China’s industrial regions — Ningbo. It had been acquired by a Spanish company several years ago, so now it mainly sells their products to its parent company.

Strengths:

Product Range: Lingya offers a comprehensive range of swimming pool equipment, making it a one-stop-shop for pool needs.

Quality Control: The company is known for its rigorous quality assurance processes.

Support from Spanish company: Since it is a branch of the Spanish company, it can share some new technologies or ideas from its parent company.

Weaknesses:

Limited Global Distribution: While their products are mainly supplied to the parent company in Spain, it does not have the plan to expand much to accept more customers worldwide.

Price Point: Since it is a branch of a Spanish company, the administration cost and operating cost is quite high, which will lead to high product price.

Longer response time to serve customers: It will need longer time to response to the requirements from customers since it should go with a complex process to apply for any adjustment to their products.

DoE-konformer Max Power Eco

DoE-konformer Giant Force Pro

Conclusion

Selecting the right pool pump manufacturer is a pivotal decision that affects not just the quality of your projects but also your profitability. The manufacturers listed above offer a variety of options to meet diverse needs and budgets. Whether your focus is on energy efficiency, cost, or customer service, there’s a manufacturer on this list that aligns with your business goals.

This article aims to serve as a comprehensive guide for professionals in the pool industry, helping you make informed decisions that can positively impact your business. With this information at your fingertips, you’re well-equipped to navigate the complexities of sourcing high-quality pool pumps as well as a reliable partner of pool pump manufacturer.

© 2022 Alle Rechte vorbehalten.

So finden Sie bei Amazon die richtige Pumpe für Ihren Pool?

So finden Sie bei Amazon die richtige Pumpe für Ihren Pool?

Geschrieben von Catherine Zhou

When your current pump quits, you will have to source a new one. Some pool owners think it is expensive to buy from pool shops or pool contractors, so they may consider to it online like Amazon, Ebay, or other online shops.

pool pumps online

Ja, I do think pumps on Amazon is a cost efficient choice for pool owner who is good at DIY. Jedoch, you may spend a lot of time and energy to find a proper one for your pool, see, so many choices that seem all suitable for your pool? If you made a wrong decision and got a wrong pump, a lot more effort should be put in to return it and perhaps the free return period has expired when you finally realize that the pump is not compatible with your pool, so finally you probably get a pump from local pool shop at high cost and an improper pump from Amazon as a sunk cost which will lay in your utility room forever.

But don’t worry, there are always ways to save money and get great deals.

In this article, I will tell you how to source a proper pool pump from Amazon and save every coin in a good manner. These conclusions are based on my 10-year experience in pool industry as well as my observation and practice for years.

pump motor label

First of all, you have to find out some key points of your old pump, these key points usually includes voltage, horse power and water flow(flow rate). In some pump, the water flow is not indicated. It doesn’t matter, voltage and horse power are basically enough.

Stromspannung

If the label on your old pump shows it is dual voltage 115/230V, you will have to find out the exact power supply that feeds to the pump. Please check with a professional electrician. Usuallt 115V wires consist of a hot line(mainly black), a null line(mainly white) and a ground line(mainly green). 230V wires consist of two hot lines and a ground line. Wrong voltage to a pool pump will soon burn out the motor. So before you place order on Amazon, please make sure that the pump voltage is in accordance with the power supply you are going to feed to the pump.

Horse Power/Flow rate

The reason why I put these two parameters together is that they both indicates the size of the pump. These two parameters are positively correlated. So you might only find one of them on the pump label in some swimming pool pumps.

If your old pump is listed as 1.5HP, do you think it can be replaced by a new 1.5HP pump? Now, please pay attention, some name brand pumps will have a SF(service factor) shown on the label as well. There is a formula: HP×SF=Total HP(kostengünstig). If the SF of your old pump is 1.3, its total horse power is 1.5×1.3=2.0HP, that means your old pump is actually a 2.0HP pump.

performance curve

Now let’s turn to the pumps listed on Amazon, as far as my observation and discovery based on several pool pumps I’ve bought from Amazon, I realize that the non-brand-name pool pumps sold online usually shows HP directly with SF 1.0 which means their HP equals to THP. So you may have to choose the 2HP one.

Wait, do you think all is over? Not yet! I find out that some sellers list larger HP than the real pump THP so as to sell it at a higher price . So, if the pump listing shows it is 2HP, the real pump may only 1.5HP or even smaller. You may have a question: How do I know its real HP???

My solution is to check the weight of the pump. Usually a 1.5HP(here means THP) pump will have a gross weight around 14kg(31 pound) or heavier, and a 2.0HP(here means THP) pump will have a gross weight around 15kg(33 pound) or heavier.

Another solution is to compare the dimension of the pump. It is normal that the dimension varies during pumps from different brand, but if the new pump is 50% smaller than your old pump, be aware, it is obviously irrational!

If you have any better solution on this issue, welcome to discuss with me via email info@jademotor.net or my face book https://www.facebook.com/jadepooltech

what you see and what you get

In der Poolbranche, many pool contractors match pumps with pools according to the flow rate, they usually recommend to finish each circle within 3 Std., das heißt, the pump flow rate(GPH) should be 1/3 of your pool size if we do not consider the influence of the sand filter here. I have checked the listed flow rate of many pumps on Amazon and finally realize that many sellers mark the flow rate too much larger than the real pump flow.

Take inground pool pumps(self-priming) for example, usually a 1.0THP pump impeller can move water around 4800GPH(80GPM), a 1.5THP pump impeller can move water around 5300GPH(88GPM), a 2.0THP pump impeller can move water around 6000GPH(100GPM). If you saw a 2.0HP pump that has water flow less than I listed above, that is probably because the manufacturer wants to run the motor in a lower power so as to keep the motor cool and result in a longer lifespan, if you met this kind of pump, it is definitely a good product! Jedoch, if a 1.5HP inground pool pump shows 8000GPH or more, please bounce off the page immediately, do not waste your time on a product with such an exaggerated description!

Congratulations! You are almost done to make correct decision on a new pump, the last thing you should consider is the local regulation on pool pump. People live in California may see the warning in red words on the right of the page: This item cannot be shipped to your selected delivery location. Please choose a different delivery location. That’s because the pump doesn’t meet energy efficiency requirement of CEC(California Energy Committee), you may have to find a CEC-compliant one.

Those are all my experience of sourcing pool pumps on Amazon or other online shops. Feel free to let me know if you have any more questions.

DoE-konformer Max Power Eco

DoE-konformer Giant Force Pro

© 2022 Alle Rechte vorbehalten.

Kann die Poolpumpe für den Teich verwendet werden??

Kann die Poolpumpe für den Teich verwendet werden??

Geschrieben von Catherine Zhou

A pool pump is a type of mechanical water pump that is used to circulate water in a swimming pool. The pool pump is typically located outside the pool, and it uses a series of filters and pipes to circulate the water. The pool pump is responsible for circulating the water, keeping the pool clean, and providing filtration.

We have recieved many inquiry from users wondering whether the pool pump can be used for pond.

The answer is: Ja. A pool pump can be a great addition to a pond, providing much needed circulation and filtration. Most pond owners are familiar with the problems that can arise from stagnant water, including algae growth and foul odors. By circulating the water, a pool pump helps to keep oxygen levels high and prevent the buildup of harmful toxins. Zusätzlich, a pool pump can be used to operate a UV filter, which will help to kill bacteria and algae. Infolge, using a pool pump in a pond can greatly improve water quality and make the pond a more enjoyable place for both people and wildlife.

Jedoch, there are a few things to keep in mind before using a pool pump in your pond.

Zuerst, pool pumps are designed to operate on a closed system, so they may not be able to handle the larger volumes of water in a pond. Please make sure the pool pump is powerful enough for your pond.

Second, pool pumps are often made of plastic, which can degrade over time when exposed to sunlight and chemicals. So it is better to place the pool pump under a sunshade or something similar.

Finally, pool pumps typically require a higher level of maintenance than other types of pond pumps. Usually pool pump has a filter basket in the strainer housing, it can filter out big mess like leaves, but smaller mess will go through and might pile up in the impeller, if things go on like this, the impeller and motor might be trapped, and the lifespan of the pool pump will be shorter. We suggest to use a more precise filter screen before dirty water goes into the pump to prevent small mess going into the pump.

DoE-konformer Max Power Eco

DoE-konformer Giant Force Pro

If you’re considering using a pool pump in your pond, be sure to weigh the pros and cons carefully before making a purchase decision.

Thanks for reading!

© 2023 Alle Rechte vorbehalten.

Selbstansaugende und nicht selbstansaugende Poolpumpen: Definition und Anwendung

Selbstansaugende und nicht selbstansaugende Poolpumpen: Definition und Anwendung

Geschrieben von Catherine Zhou

In der neuen Dedicated Purpose Pool Pump-Verordnung, die am 19. Juli in Kraft trat 2021, Alle Poolpumpen sind in selbstansaugende und nicht selbstansaugende Pumpen unterteilt, die unterschiedliche Energieeffizienzstandards erfüllen müssen. Allgemein gesagt, Die DPPP-Regel sieht strengere Energieeffizienzstandards für selbstansaugende Poolpumpen vor als für nicht selbstansaugende Poolpumpen. Aber woher wissen wir, ob eine Poolpumpe selbstansaugend ist oder nicht??

Definition

Genau genommen, Gemäß der traditionellen Definition von selbstansaugend sind nicht alle Poolpumpen selbstansaugend, da es sich bei allen Poolpumpen um Kreiselpumpen handelt. Es gibt keine Dichtungen zwischen Saug- und Druckseite der Pumpe. Dies bedeutet, dass Kreiselpumpen mit Luft wirkungslos sind und nicht in der Lage sind, Luft aus einer Saugleitung zu evakuieren, wenn der Flüssigkeitsspiegel unter dem des Laufrads liegt. In solchen Fällen, Die Pumpe sei luftgebunden und es bestehe die Gefahr einer Überhitzung: allgemein, Pumpen sind auf die gepumpte Flüssigkeit angewiesen, um die Lager der Pumpe zu schmieren und zu kühlen.

Die DPPP-Regeln unterschieden die Poolpumpen jedoch in selbstansaugende und nicht selbstansaugende Pumpen, Mal sehen, wie es sich definiert: Unter einer selbstansaugenden Poolfilterpumpe versteht man eine Poolfilterpumpe, die gemäß NSF/ANSI 50–201515 als selbstansaugend zertifiziert ist oder in der Lage ist, sich wieder auf eine vertikale Anhebung von mindestens 100 kg anzusaugen 5.0 Füße mit einer tatsächlichen Grundierungszeit kleiner oder gleich 10.0 Protokoll, bei Prüfung gemäß NSF/ANSI 50–2015, und ist keine Wasserfallpumpe.

DoE-konformer Max Power Eco

DoE-konformer Giant Force Pro

Anwendung

Das legt auch die DPPP-Regel nahe, Normalerweise gilt eine Pumpe für den Bodeneinbau als selbstansaugend und eine Pumpe für den Aufstellpool gilt als nicht selbstansaugend. Das verärgert einige Poolbesitzer ziemlich: Meine in den Boden eingelassene Poolpumpe scheint gemäß der Definition der DPPP-Regel nicht selbstansaugend zu sein, Muss ich es ersetzen??

ich würde sagen, Das ist nicht nötig. Die Definition der DPPP-Regel bezieht sich auf Energieeffizienzstandards, Es hat keinerlei Auswirkungen auf die Leistung der vorhandenen Poolpumpen. In der Poolbranche, bevor die DPPP-Regeln in Kraft traten, Normalerweise betrachten wir diesen hohen vertikalen Auftrieb & Poolpumpen mit geringem Durchfluss, selbstansaugend und mit geringem vertikalen Hub & Poolpumpen mit hoher Förderleistung, da nicht selbstansaugend. Wenn die Poolpumpen die Energieeffizienzanforderungen der DPPP-Regel erfüllen können, Sie können für Ihren in den Boden eingelassenen Pool weiterhin eine nicht selbstansaugende Poolpumpe verwenden, solange der Wasserstand möglichst nahe am vertikalen Hub der Pumpe liegt. Mit anderen Worten, wenn der Wasserstand weit unter dem vertikalen Hub der Pumpe liegt, Wir empfehlen die Verwendung eines Rückschlagventils, um zu verhindern, dass Luft in die Saugleitung gelangt.

Fazit und Vorschlag für Poolpumpen-Händler: Wenn die von Ihnen verkaufte Poolpumpe den DPPP-Regeln entspricht, Sie können sie weiterhin wie bisher verkaufen, unabhängig davon, ob die Pumpe selbstansaugend ist oder nicht, Bitte Behalten Sie Ihre Verkaufsstrategie bei wie vorher.

Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, Wir, als professioneller Poolpumpenhersteller, helfen Ihnen jederzeit gerne weiter!

© 2022 Alle Rechte vorbehalten.

Ist eine Solarstrom-Poolpumpe eine gute Investition??

Ist eine Solarstrom-Poolpumpe eine gute Investition??

Geschrieben von Catherine Zhou

Solar-Poolpumpen sind eine beliebte Wahl für Poolbesitzer, die ihren CO2-Fußabdruck reduzieren möchten. Ist es eine gute Investition, eine solarbetriebene Poolpumpe zu kaufen?? Solar-Poolpumpen kosten in der Regel mehr als herkömmliche elektrische Poolpumpen. Zusätzlich, Für eine optimale Leistung benötigen Solar-Poolpumpen einen sonnigen Standort. Wenn sich Ihr Pool in einem schattigen Bereich befindet, Möglicherweise können Sie nicht den vollen Nutzen aus der Solarpumpe ziehen. Darüber hinaus, Solar-Poolpumpen sind zur Notstromversorgung auf Batterien angewiesen, was die Betriebskosten erhöhen kann. Aus diesen Gründen, Solar-Poolpumpen sind möglicherweise nicht für jeden die beste Wahl. Bevor Sie eine Entscheidung treffen, Es ist wichtig, die Vor- und Nachteile von Solar-Poolpumpen abzuwägen, um herauszufinden, ob sie für Sie geeignet sind.

Poolpumpe mit Solarenergie

Die Installation einer Solarpumpe ist teurer als die Installation herkömmlicher Poolpumpen

Solar-Poolpumpen erfreuen sich immer größerer Beliebtheit, Sie sind jedoch teurer als herkömmliche Pumpen. Solarpumpen werden von der Sonne angetrieben, Das bedeutet, dass Hausbesitzer Geld bei ihren Energierechnungen sparen können. Zusätzlich, Solarpumpen sind umweltfreundlicher als herkömmliche Pumpen, da sie keine Emissionen verursachen. Jedoch, Die Anschaffungskosten einer Solarpumpe können mehr als betragen $ 1,000, was es zu einer bedeutenden Investition macht. Zusätzlich, Solarpumpen erfordern eine regelmäßige Wartung und den Austausch von Teilen, was die Gesamtkosten erhöhen kann. Für Hausbesitzer, die über eine Solar-Poolpumpe nachdenken, Es ist wichtig, die Vorlaufkosten gegen die langfristigen Einsparungen abzuwägen. Während Solarpumpen möglicherweise einen höheren Anfangspreis haben, Sie können Hausbesitzern langfristig Geld sparen.

Installation einer Solarstrom-Poolpumpe

Der Return on Investment einer Solarpumpe lohnt sich möglicherweise nicht

Eine Solarpumpe ist ein Gerät, das mithilfe von Sonnenkollektoren Sonnenlicht in elektrische Energie umwandelt, das dann zum Antrieb einer Wasserpumpe verwendet wird. Solarpumpen werden häufig an abgelegenen Orten eingesetzt, an denen kein Zugang zum Stromnetz besteht. In einigen Fällen können Solarpumpen jedoch eine praktikable Option sein, Aus finanzieller Sicht sind sie nicht immer die beste Wahl. Solarpumpen haben in der Regel höhere Anschaffungskosten als herkömmliche Elektropumpen, Außerdem erfordern sie eine regelmäßige Wartung und den Austausch von Teilen. Infolge, Die Kapitalrendite einer Solarpumpe ist oft recht gering. In vielen Fällen, Es lohnt sich einfach nicht, eine Solarpumpe zu installieren.

Poolpumpe mit Solarenergie

In einigen Häusern, Die Hausbesitzer installierten viele Solarpaneele, um Strom aus dem Sonnenlicht zu gewinnen, in diesen Fällen, Eine herkömmliche Poolpumpe reicht aus, da die Stromversorgung vom Terminal bereits über die Solaranlage erfolgt.

Wenn Sie nach einer Poolpumpe suchen, mit der Sie langfristig Geld sparen können, und Ihr Haus werden nicht vollständig vom Solarpanel abgedeckt, Sie können eine Pumpe mit variabler Drehzahl in Betracht ziehen. Pumpen mit variabler Drehzahl verbrauchen weniger Energie als herkömmliche Poolpumpen, So sparen Sie Geld bei Ihrer Energierechnung. Zusätzlich, Pumpen mit variabler Drehzahl sind langlebiger und erfordern weniger Wartung, So sparen Sie auf lange Sicht Geld.

Hier ist eine Auswahl für Sie:

© 2022 Alle Rechte vorbehalten.

oben 7 Tipps zur Fehlerbehebung bei Poolpumpen von einem professionellen Hersteller

oben 7 Tipps zur Fehlerbehebung bei Poolpumpen von einem professionellen Hersteller

Geschrieben von Catherine Zhou

As a pool pump manufacturer with nearly 10 Jahre Erfahrung, we have encountered a variety of questions from distributors or end users regarding why their pump don’t work properly, all of those questions has been fixed based on our effort to work out the solutions. In diesem Blogbeitrag, I will introduce top 7 common pool pump problems that people met in using pool pumps and the solution on how to fix them. Hope this blog will help more users to fix the pool pump trouble and operate their pumps more easily and smoothly.

Problem 1: Pool Pump Motor will not start

Possibility 1: Wrong wiring

Solution: Check the wiring of your pump, rewire it if necessary. Please read the instructions carefully and follow it strictly.

Possibility 2: Loose electrical connection

Solution: Check all the circuit connection points and make sure all the points are well connected.

Possibility 3: Switches or relays not closed

Solution: Closed the swtiches and relays properly.

Possibility 4: Tripped circuit breakers or GFCI’s

Solution: Check to see if there’s electricity leakage on any point, if so, repair it and then restart the breaker.

Possibility 5: Fuse is open

Solution: Change a new fuse with the proper ampere & voltage.

Possibility 6: No power supply or improper power supply

Solution: Make sure power is on and the voltage ranges in 90%–110% of the rated voltage.

Possibility 7: Broken timer

Solution: If pump connects to a timer, make sure it works

Possibility 8: Trapped motor

Solution: Open the motor back cover and rotate the shaft manually to see if it is clogged. Usually clogged impeller or trapped rotator can lead to trapped motor, check both of them to determine the final problem.

Problem 2: Pool Pump Motor shuts off

Possibility 1: Overload or overheat protection is activated

Solution: Allow the motor to cool down and restart it after 30 Protokoll. If problem still exists, check if the amperage reading is over the rated current when pump is working. If so, check if there’s any blockage on the impeller or strainer basket, clean it up and restart the motor.

Possibility 2: Motor capacitors are damaged

Solution: Change new capacitors with the proper voltage & capacitance ratings.

Possibility 3: Wrong wiring size or extension cords

Solution: Replace the current wires or cords with sufficient sized ones.

Possibility 4: Low voltage

Solution: This could happen in some area where the voltage supply is not stable. If possible, use a voltage regulator to provide more stable voltage for the motor.

Possibility 5: Motor overheating due to damage in violent transportation. This could happen when the pump is source online and delivered by express.

Solution: Open the motor back cover and check if any part is deformed or not. If so, change new parts and restart the motor. If it can not be repaired, change the whole motor.

Problem 3: Pool Pump Motor hums but can not start.

Possibility 1: Centrifugal switch stuck in OPEN position

Solution: Use a small stick or other objects to move the switch to CLOSED position.

Possibility 2: Trapped impeller or motor shaft

Solution: Motor shaft can be rotated manually to check if it is trapped. Usually impeller is the main reason to cause this problem, open the motor back cover and check if impeller is OK or not.

Problem 4: Pump can not prime

Possibility 1: Pump hasn’t been primed properly

Solution: Make sure pump strainer housing is filled with water. Check to see if strainer cover is sealed properly without air leakage.

Possibility 2: Blockage in the piping system

Solution: Check if there’s any blockage on the inlet and outlet of the pump, clean it up if necessary. Make sure all necessary valves are in open position and the water can circulation freely.

Possibility 3: Air leaks in the piping system

Solution: Check all the joints and make sure they are tightened.

Problem 5: Low water flow

Possibility 1: The filter screen or suction pipe is blocked or restricted

Solution: Remove all the sucked object and make sure water can go through the plumbing system smoothly.

Possibility 2: Pipe not big enough for more water to go through

Solution: Usually 1.5” pipe allows a maximum flow of 45GPM, 2.0” allows a maximum flow of 80GPM and 2.5” allows a maximum flow of 110GPM. Make sure the pipe size you used is proper to the pump rated flow.

Possibility 3: Filter pressure too high due to dirty filter media

Solution: If pump connects to a sand filter, backwash the sand filter; If pump connects to a cartridge filter, replace the cartridge.

Possibility 4: Leakage from the pump lid or connectors/fittings

Solution: If air leaks in suction pipe, pump will rumble constantly. Tighten the pump lid or fittings, if any of them is damaged, replace immediately.

Possibility 5: Abnormal Suction line or discharge line

Solution: If the suction line is longer than 25 ft, or has more than 4 elbows, it will significantly reduce the flow. Also check if there’s any kink on the discharge line which could also lead to low flow rate.

Possibility 6: Leak at any joint

Solution: Please refer to possibility 3 in problem 3.

Possibility 7: Low pool water level

Solution: If the pool water level is lower than half of the skimmer opening, it will cause low flow rate. Fill up the pool to proper water level and check if the problem persists.

Problem 6: Pump is noisy

Possibility 1: If you hear grinding noise, it might be caused by an object caught in the impeller

Solution: Turn off the power and check if there’s any object caught in impeller. Remove it and restart the pump.

Possibility 2: If you hear humming noise, it might be caused by low voltage

Solution: Please refer to possibility 4 in problem 2.

Possibility 3: Worn out bearings

Solution: Bearings are important to the motor, once they are damaged, the whole motor will be noisy. The only solution is to replace the motor.

Possibility 4: Worn out impeller or voluteSolution: Once impeller or volute is worn out, it will cause water to leak from the pump and make noise. The only solution is to replace the impeller or volute.

Possibility 5: Pump base vibration

Solution: Check if the base is installed properly and all the bolts are tightened. Also make sure there’s no object blocking the pump, which could lead to vibration.

Possibility 6: Foreign matters in the pump, especially around the impeller

Solution: Try to remove the foreign matters from the pump.

Problem 7: Pool Pump is leaking

Possibility 1: Water leaks from where the motor connects to the wet side.

Solution: This usually indicate the shaft seal fails. Replace it immediately.

Possibility 2: Water leaks from pump housing.

Solution: Open the pump housing to see if the O-ring is in good condition, move it to the correctly place or replace it if necessary.

Possibility 3: Water leaks from pump lid.

Solution: Open the pump lid and check condition of the O-ring, if it is not sit well in the right place, take it off and reassemble it. If it is broken, replace it immediately.

Above 7 problems are those been met most frequently by the users, I hope they can help you when your pump doesn’t work well.

Zusätzlich, proper maintenance of the pool pump can void most of these problems. Regularly maintenance is necessary.

We hope you find these tips useful. If you have any further questions, please feel free to contact us. We’re always happy to help!

© 2022 Alle Rechte vorbehalten.

Welchen HTS-Code sollte ich verwenden, um die Benutzerdefiniert beim Importieren von Pumpen zu löschen?

Welchen HTS-Code sollte ich verwenden, um die Benutzerdefiniert beim Importieren von Pumpen zu löschen?

Geschrieben von Catherine Zhou

Beim Import von Pumpen in die Vereinigten Staaten, Sie müssen einen speziellen Code verwenden, um den Zoll zu erledigen. Der Code, den Sie benötigen, wird als HTS-Code bezeichnet. In diesem Blogbeitrag, Wir besprechen, welchen HTS-Code Sie beim Import von Pumpen verwenden sollten, und geben einige Tipps, wie Sie den Prozess so reibungslos wie möglich gestalten können!

Die Auswahl eines geeigneten HTS trägt dazu bei, dass Ihre Pumpen schnell und problemlos vom Zoll abgefertigt werden. In manchen Fällen, Ein richtiger HTS-Code hilft auch dabei, unnötige Kosten für Ihre Pumpen zu sparen.

Zuerst, Sie müssen den Typ Ihrer Pumpen herausfinden. Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, Unsere Poolpumpen sind alle Kreiselpumpen, also verwenden wir normalerweise 8413.70.2005 für unsere Pumpen mit 1,5″ Häfen, Was heisst “andere Kreiselpumpen mit Druckstutzen unter 5.08 cm Durchmesser” und 8413702015 für unsere Pumpen mit 2.0″ Häfen, Was heisst “andere Kreiselpumpen mit Druckstutzen 5.08 cm oder mehr im Durchmesser”. Einige Importeure werden auch verwenden 8413.70.0060. Dieser Code deckt alle Arten von Kreiselpumpen ab, einschließlich solcher, die speziell für Pools entwickelt wurden.

DoE-konformer Max Power Eco

DoE-konformer Giant Force Pro

Für andere Pumpen, Einen richtigen HTS-Code finden Sie unter dem Code beginnt mit 8413. Sie können einen beliebigen Code wählen, den Sie für richtig halten, aber erinnere dich, Bitte seien Sie ehrlich und wählen Sie den Code so passend wie möglich zu Ihren Produkten. Andernfalls, Möglicherweise haben Sie Probleme bei der Zollabfertigung.

Wenn Sie kein Importeur aus den USA sind, Sie können auch einen geeigneten benutzerdefinierten Code für Pumpen finden. Normalerweise, Der Erste 6 Ziffern sind auf der ganzen Welt universell. Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, Poolpumpen haben einen universellen benutzerdefinierten Code, der mit beginnt 8413.70

Weitere Details zum Code, wenden Sie sich bitte an Ihren örtlichen Zoll, Ich denke, sie werden gerne helfen.

© 2022 Alle Rechte vorbehalten.

Warum sollte der Pumpenmotor mit der Poolstruktur verbunden sein??

Warum sollte der Pumpenmotor mit der Poolstruktur verklebt werden??

Geschrieben von Catherine Zhou, 9 Jahre Erfahrung in der Poolbranche.

Some pool owners will wonder why the pool pump motor should be bonded to the pool structure when they see the instructions on the user manual.

There are a lot of benefits to bonding your motor to the pool structure. By doing so, you can improve the safety and performance of your pool pump. In diesem Blogbeitrag, we will discuss why it is important to bond your motor to the pool structure and how to do it properly. Stay safe and enjoy your swimming season!

Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können

When you bond your motor to the pool structure, you are essentially creating a electrical connection between the two. This helps to prevent any potential hazards that could occur if there was an electrical issue with the pump. It also helps to improve the performance of the pump by ensuring that it is getting a proper ground.

Machtkrise

Bonding your motor to the pool structure is a fairly simple process. You will need to purchase a bonding kit from your local pool supply store. The kit will come with everything you need to properly bond the pump to the pool. Once you have the kit, simply follow the instructions and you should be good to go!

We hope that this blog post has helped you!

© 2022 Alle Rechte vorbehalten.

Spezielle Regelung für Poolpumpen: Warum ist es notwendig??

Spezielle Regelung für Poolpumpen:
Warum ist es notwendig??

Geschrieben von Catherine Zhou

An earthquake took place on July 19, 2021 in Pool Industry when a new regulation regarding pool pumps came into effect on that day, that is Dedicated Purpose Pool Pump Regulation.

After then, pool pumps manufactured in the USA should all meet the energy requirement which is meassured by WEF(Weight Energy Factor). 80% pool pumps disappeared due to this regulation. The rest pumps are all with high energy efficeny motors such as variable speed pumps or some capacitor operate motor pumps. Infolge, pool owners will have to pay more for a DoE-compliant pool pump. Some consumers even complain about this. Let me tell you why the regulation is necessary.

One of the main reasons why homeowners should consider making the switch to a dedicated purpose pool pump is because it can help save money on energy bills. A lot of people do not realize that their regular pool pump is actually using more energy than necessary. This is because the regular pump is designed to work with a filter and a chlorinator. But when you are only using the pump to circulate the water in your pool, you do not need to use as much energy.

Another reason why making the switch to a dedicated purpose pool pump is a good idea is because it can help prolong the life of your pool pump. This is because when you are using a regular pump, there is a chance that it will overwork itself and eventually break down. But when you use a dedicated purpose pool pump, you can be sure that it will not overwork itself since it is only being used for one specific task.

DoE-konformer Max Power Eco

DoE-konformer Giant Force Pro

So, if you are looking to save money on your energy bills and prolong the life of your pool, then making the switch to a dedicated purpose pool pump is a good idea. It is important to note, jedoch, that you will need to purchase a new pool pump if you want to make this switch. But it will be worth it in the long run!

If you found this blog post helpful, we encourage you to share it with your friends and family.

© 2022 Alle Rechte vorbehalten.

5 Tipps, die Sie vor dem Import von Poolpumpen wissen müssen

5 Tips You Need to Know
before Importing Pool Pumps

Geschrieben von Catherine Zhou

If you are new in the market for pool pumps, you may be wondering if it is worth importing one from pool pump manufacturer overseas. Pool pumps can be expensive, so it is important to do research before making a purchase. In diesem Blogbeitrag, we will discuss five tips that you need to know before importing pool pumps.

Tip1: How much margin you can get from this importing business.

Firstly, you should know the average retail price of pool pumps in your target market.

The price of a new pool pump can vary depending on the type and size of the pump, as well as the brands you check from. I suggest you refer to the median price of a swimming pool pump. Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, a 1.5 hp non-famous brand pool pump in US costs $200 in average and a 1.5 hp Hayward pool pump could be $800. If you are new in the swimming pool pumps market, I think it is better that you refer to the price of non-famous brand pool pumps.

Secondly, research the cost of the pump from different oversea manufacturers.

In China, prices can vary widely depending on the quality of the pump. I saw some complaint on amazon saying: you’ll get what you pay for. This is also true when it comes to source pool pumps. Please do not focus on the lowest price listed on some B2B websites. I suggest you also refer to the median price of these suppliers. Usually trade companiesquote will be higher than that from factories, this is normal since the trade companies usually provides with better service than that of factories.

Jedoch, I do see some factories that supply good service or even better service than trade companies, if you meet one of these amazing factories, work with them immediately! Let me tell you more, Ningbo Jade Pool Technology Co., GmbH. is one of these factories supplying energy efficient pool pumps and trustworthy service, why notcontact us now?

Let’s come back to the point. Based on my 9 Jahre Erfahrung in der Poolbranche, usually the direct factory price of a non-famous 1.5 hp pool pump ranges from $90 zu $150 for bulk orders based on volume.

Thirdly, find out if there are any import duties or taxes that will be applied to the purchase.

In order to find out if there are any import duties or taxes that will apply to your purchase, you will need to contact the local customs authority. They will be able to provide you with information on the applicable rates and how they are calculated. We usually use HS code begins with 841370, this is a universal number in the world, the rest numbers will be different in different Countries. Please check with the customs authority agency.

Fourthly, consider the shipping costs from the supplier to your Country.

It is important to know the exact dimension of pool pumps from the supplier since the sea freight is mainly calculated accroding to the dimension of goods. Usually a 40HQ container space is 68CBM which can carry 1200 pumps. So if you know the cost of the 40HQ container, you will know the shipping cost of each pump. The sea freight fluctuates sharply in recent years, please check the lastest shipping cost with your forwarder or ask them for a cost efficient solution in transportation.

Tip2: Which pump type is more popular?

Based on pool type

There are inground pool pumps and above ground pool pumps in the market. Normalerweise, an inground pool pump has higher lift than above ground pool pump, and it is calledself-priming”; An above ground pool pump has bigger flow than inground pool pump of the same HP, but it is not self-priming, it should be located below the water level.

Inground Pool Pump

Above Ground Pool Pump

You will also have to know the percentage of in-ground and above-ground swimming pools existed in your Country. In US, 65% of the swimming pools are inground type and 35% are above ground type. Those data is for private pools instead of commercial swimming pools So maybe you should consider imporing more inground pool pumps than above ground ones.

Based on speed

There are single speed, two-speed and variable speed pool pumps available. In US residential market, two-speed pool pumps take up 55% of the total market and single speed only has about 20% since two-speed can save energy costs a lot. So maybe you should consider importing more two-speed swimming pool pumps than single speed pump.

There’s also another pool pump type which seems more popular than previously when pool owners consider to source energy efficient pool pumps, that is variable speed pumps. More and more people prefer variable speed since the energy cost becomes more expensive year by year, but the market share is still not quite big due to its relatively high cost. So you may also consider to import variable speed swimming pool pump to diversify your business. As far as I know, there are not so many Chinese factories(Less than 3 factories) have the ability to manufacture a perfect variable speed pump. I’m pround to say that our factoryNingbo Jade Pool Technology Co., GmbH. is one of those who makes amazing variable speed pumps, we developed the 1st variable speed pump in 2015, during 7 years improvement, now our variable speed pump is quite user friendly, and has received plenty of good reviews from thousands of pool owners. Many distributors benefit from dealing with our variable speed pumps. If you are also interested, Bittecontact us immediately for more details.

Tip 3: Please note the electric power supply specification in your Area.

Here are some main specifications that you should focus on. Fail to follow may cause trouble in your pool pump business.

Voltage and Frequency

Wrong voltage or frequency can burnt the pump motor easily. You will have to find our the voltage and frequency supplied in your Country. Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, the voltage in US is 110-120V/60Hz and 220-230V/60Hz, usually 110-120V power supply needs a power plug while 220-230V doesn’t. Most inground swimming pool pumps are supposed to be wired with 220-230V power supply and most above ground pool pumps require 110-120V supply. So, you can save the power cord cost by offering inground pool pumps without power cord.

Power Plug Type

There are also various plug types in different area. Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, the plug type in US is NEMA, In Europe, the voltage is 220-240V/50Hz and the plug type is Schuko or BS. The wire size could be different as well. You will also need to find out if a GFCI (ground fault circuit interrupter) is required in your Country. If you get these information wrong, the customer will be very confused.

Tip 4: The plumbing specification of your Country

The suction and discharge port size of the pool pump is usually standardised to be mm or inch in diameter. You will need to check with your local plumber or pool builder what is the most popular size they are using. This is because different Countries have different plumbing standards.

Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, in US residential market, the pipe size is usually 48mm(1.5 Zoll) in many old houses and 60mm(2.0 Zoll) in mang new houses. But in Europe, people use 50mm and 63mm pipes. Wrong size pump ports can be a big problem for your business. But don’t worry, our factory has worked with customers from all over the world, we have rich experience about the pipe size in difference areas.

Darüber hinaus, you’d better also check if the fitting to be used on the pool pump you imported is easy to source in local shop, this is an important point that pool owners will consider when they are searching pumps. No one wants to replace the whole pump because of a fitting problem. We offer various fitting types for our pumps, you may keep some spare parts as well as fittings in stock in case required by the end user.

If you want to know more about plumbing suggestion, please feel free to contact us. We are glad to help no matter you are interested in our products or not.

Tip 5: Find out the regulation in your Country to sell pool pumps

There are certain standards that pool pumps have to meet in order for them to be sold in a Country. You will need to find out what these standards are and make sure that the pump you are importing meets these standards.

Safety Standards

This is a base standard for electrical products, you have to prove the products will not cause serious injury to end users via safety test by authorized labs. Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, in US, the CSA (Canadian Standards Association) and ETL (Intertek) certification is required. In some other Coutries, EG, SAA, SGS could also be a mandatory certificate.

Energy Standards

You should also check if there are any other special regulations in your Country that you need to be aware of. Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, in US, the pool pumps have to be DoE-compliant in order to be sold. This is an energy efficiency regulation which took into effect in July 19th, 2021. Please double check with the supplier if their products are approved by all the mandatory regulations.

We hope these tips could help you a little bit in your import decision. If you have any other questions, please feel free to contact us. Our team would be happy to assist you further. Thank you for reading!

© 2022 Alle Rechte vorbehalten.

Was ist, wenn eine große Pumpe mit einem kleinen Sandfilter aus Kunststoff arbeitet??

Was ist, wenn eine große Pumpe mit einem kleinen Sandfilter aus Kunststoff arbeitet??

Kategorie.

Fay Wang von Ningbo Jade Pool Technology Co., GmbH.

Kategorie

Kategorie, Kategorie. Kategorie 5 Monate. Kategorie.

Kategorie

“Kategorie, Kategorie, Kategorie?”

Kategorie.

Gut, Kategorie, Kategorie.

Kategorie. Aber die Frage ist nur, Aber die Frage ist nur″ Aber die Frage ist nur? Aber die Frage ist nur″(500Millimeter) Aber die Frage ist nur.

Aber die Frage ist nur, Aber die Frage ist nur, Aber die Frage ist nur, Aber die Frage ist nur.

Aber die Frage ist nur″(500Millimeter) sand filter, 1.5Aber die Frage ist nur″(600Millimeter), 2Aber die Frage ist nur″ Aber die Frage ist nur″ sand filter.

Aber die Frage ist nur.

Aber die Frage ist nur. Aber die Frage ist nur, Aber die Frage ist nur, Aber die Frage ist nur″ Aber die Frage ist nur.

Aber die Frage ist nur, Aber die Frage ist nur. Aber die Frage ist nur.

Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen, Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen, Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen.

Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen!

Wie sich die Energiekrise auf unsere Produktion auswirkt?

Wie sich die Energiekrise auf unsere Produktion auswirkt?

Von Catherine Zhou

Okt. 15 2021

Machtkrise

Ich denke, die meisten von euch haben von der Energiekrise auf der ganzen Welt gehört.

Um der Krise zu begegnen, Wir chinesischen Fabriken wurden gebeten, die Arbeitszeit zu reduzieren, um Energie zu sparen.

Viele unserer Materiallieferanten haben uns mitgeteilt, dass sie funktionieren werden 4 Tage und halt für 3 ab jetzt tage die woche. Einige ewige Arbeit 2 Tage und halt für 5 Tage in der Woche.

So, in naher zukunft, die Vorlaufzeit unserer Lieferanten wird länger als zuvor sein und zu einer längeren Vorlaufzeit unserer Produkte führen.

Normalerweise ist unsere Vorlaufzeit 30-45 Tage, aber in naher zukunft, die Vorlaufzeit könnte sein 45-60 Tage, wenn kein Lagerbestand in unserem Lager vorhanden ist. Diese Situation wird bestehen, bis die Energiekrise gelindert ist.

Wir empfehlen unseren Kunden, sich viel früher als früher auf Bestellungen vorzubereiten. Aber wir werden auch einiges auf Lager halten, damit unsere Kunden nicht zu lange warten.

Bitte zögern Sie nicht mich zu kontaktieren, wenn Sie an unseren Produkten interessiert sind.

Wir sind hier, um Ihnen zu helfen

kontaktiere uns heute

© 2021 Alle Rechte vorbehalten

Poolgröße und Poolpumpenleistung

Poolgröße und Poolpumpenleistung

Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen

Mitarbeiter von Jade

Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen

Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen.

Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen, Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen.

Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen, Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen. Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen 3 Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen 3-4 Std., Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen 200 Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen.

Wenn Sie Fragen zu diesen Daten haben oder auch auf eine besondere Situation an der Pumpe und dem Sandfilter stoßen, Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können.

Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können 14400 Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können(14400/3Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können) Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können(4800/60Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können).

Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können. Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können.

Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können.

Rohrgröße

1.5″ (50Millimeter)

2.0″ (63Millimeter)

2.5″ (75Millimeter)

3.0″ (90Millimeter)

Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können

45 GPM

80 GPM

110 GPM

160 GPM

Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können: info@jademotor.net

Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können, Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können:

Warum mein Pool grün oder rosa erscheint?

Poolbesitzer sollten eine Poolpumpe mit Durchflussrate wählen, anstatt nur mit Pferdestärken, da die gleichen PS-Pumpen unterschiedliche Durchflussraten erreichen können

Warum mein Pool in mehreren Farben erscheint?

Wenn Ihr Pool grün erscheint,

Wald

Algen könnten nicht die Schuldigen sein. Ihr Poolwasser könnte mehrere Farben haben, weil Sie Metall im Wasser haben, die das Chlor oxidiert hat. So, statt Grünalgen, Ihr Pool könnte Kupfer enthalten. Wenn Ihr Pool einen rötlichen Farbton hat, Ihr Poolwasser enthält wahrscheinlich Eisen. Violette oder schwarze Farbtöne deuten darauf hin, dass Ihr Poolwasser möglicherweise Mangan enthält.

DoE-konforme Jade-Poolpumpen

DoE-konforme Jade-Pumpen

Sehen Sie sich diese Seite an, um mehr über DoE-konforme Jade-Poolpumpen zu erfahren

Die USA. Energiebehörde (Damhirschkuh) hat neue Energieeffizienzstandards für Poolpumpen entwickelt, die ab Juli hergestellt wurden 19, 2021.

Wie im vorherigen Beitrag erwähnt, Poolpumpen sollten nach Juli das minimale WEF erfüllen 19, 2021. Jade hat alle Poolpumpen an ein qualifiziertes und autorisiertes Labor geschickt, um sie auf WEF testen zu lassen.

Glücklicherweise, Einige der Pumpen erfüllen die von DoE geforderte Mindest-WEF ohne jegliche Verbesserung. Die restlichen Pumpen sollten verbessert und neu gestaltet werden, um sie DoE-konform zu machen.

Verwenden Sie die folgenden Tabellen, um DoE-konforme Jade-Poolpumpen zu finden.

Auftreten von Doppelspannung im Boden selbstansaugende Pumpe

1 Serie

Modell#: J05501, J07501

Auftreten von Doppelspannung im Boden selbstansaugende Pumpe

2 Serie

Modell#: J05502, J07502

auftreten von 3 Serie oberirdische Poolpumpe

3 Serie

Modell#: J03703, J05503, J07503, J11503

auftreten von 3 Serie oberirdische Poolpumpe

4 Serie

Modell#: J03704, J05504, J07504, J11504

CEC-zugelassen in Bodenpoolpumpe

CEC In-Boden-Poolpumpe

Modell#: J5002CEC, J18002CEC

Vom California Energy Committee genehmigte oberirdische Poolpumpe

CEC oberirdische Poolpumpe

Modell#: J15004CEC

Aussehen der intelligenten Poolpumpe

Smart-Serie

Modell#: J01804, J02604

Aussehen der Minipumpe

Mini-Serie

Modell#: J01804, J02604

Kontaktieren Sie uns, um mehr über DoE-konforme Produkte zu erfahren!

Was ist der Unterschied zwischen HHP und THP?

über Neue Verordnung für Hirschkuh IN DEN USA

Was ist der Unterschied zwischen HHP und THP?
Wie erkennt man das WEF einer Pumpe?

Bitte nicht mit HHP und THP verwechseln. Hier ist ein Artikel, der den Unterschied zeigt und basierend darauf, dass es für Sie ziemlich einfach ist, zu verstehen, was vor sich geht. Ich zitiere es nur hier:

HP, THP und HHP in der DoE-Verordnung

Alles hängt von HHP statt THP ab.

Die Pumpe kann mit einfacher oder variabler Geschwindigkeit betrieben werden, solange sie die neuen DoE-Kriterien erfüllt, es ist gut, was in der DoE-Tabelle unten gezeigt wird.

Um es einfach zu machen, Sie müssen nur die HHP der Zielpumpe berechnen und wenn sie zwischen dem Bereich von . liegt 0.711 auf weniger als 2.5 dann wenden Sie die entsprechende Formel an, um den WEF zu berechnen und vergleichen, ob der gemessene WEF größer als der berechnete WEF ist. Wenn dies der Fall ist, qualifiziert sich die Zielpumpe für die neuen DoE-Regeln.

US DoE DDDP Ablehnung

Wenn Sie eine Pumpe testen möchten, um zu sehen, ob sie die WEF-Anforderungen erfüllt, Zuerst müssen Sie die C-Kurve und die PS berechnen und dann den Rest des Tests basierend auf einer einzelnen Geschwindigkeit oder einer variablen/mehrfachen Geschwindigkeit durchführen und dann die WEFs berechnen. Wenn sie die minimal zulässige WEF-Punktzahl wie oben in der Tabelle gezeigt erfüllen, qualifizieren sie sich für die neuen DoE-Regeln, andernfalls verfehlen sie einfach die neuen Regeln.

Glücklicherweise, Die meisten WEF-Werte der Poolpumpe von Jade sind größer als die minimal zulässige WEF-Punktzahl, das heißt, Jade Poolpumpen dürfen in den USA verkauft werden, Sie müssen sich nur vor dem Verkauf auf der DoE-Website als Händler unserer Pumpen registrieren.

Noch Fragen, bitte lass es uns wissen unter info@jademotor.net

Danke für Ihre Aufmerksamkeit!

Über die DPPPs-Regel – Wie berechnet man HHP?

Über DPPPs-Regeln - So berechnen Sie den HHP?

HHP bedeutet Hydraulische Pferdestärke, es wird als Druck mal Durchfluss berechnet und durch einen Koeffizienten geteilt.

Hier ist die Formel:

HHP=P*Q/1714

HHP ist in der Einheit PS, es spiegelt die Leistung der Pumpe wider.

P ist der Druck mit der Einheit psi.

Q ist die Durchflussmenge in der Einheit GPM.

Nehmen Sie zum Beispiel die Pumpe des Jade-Produkts J15001, die Pumpe hat einen Durchfluss von 92 GPM um 35 psi, dann wird sein HHP berechnet als 35*92/1714=1,88

Notiz: Die obigen psi- und GPM-Daten basieren auf Tests, die in Jades eigenem Labor durchgeführt wurden. Sollte eine Diskrepanz zwischen diesen Daten und anderen Testergebnissen eines maßgeblichen Labors auftreten?, die Daten der Behörde haben Vorrang.

In Kilowatt, die Formel der hydraulischen Leistung sollte HkW=P*Q/2298 . sein

HkW ist in der Einheit kW, es spiegelt die Wattleistung der Pumpe wieder.

P ist der Druck mit der Einheit psi.

Q ist die Durchflussmenge in der Einheit GPM.

Eine gute Kundenbewertung von Distributoren in Saudi-Arabien

Eine gute Kundenbewertung von Distributoren in Saudi-Arabien

Ein Wiederverkäufer in Saudi-Arabien entscheidet sich nach einer Musterbestellung für eine Zusammenarbeit mit uns, So denkt sein Kunde über die Jade-Poolpumpe:

Kundenbewertung zu Jade Pump

Dieser Wiederverkäufer ist sehr professionell in der Poolbranche, Er kennt alle bekannten Marken für Poolprodukte. Soweit seine Erfahrung und Vergleich, Er glaubt, dass Jade-Produkte das gleiche Leistungsniveau wie die von berühmten Marken wie Hayward haben, Pentair usw..

Wenn Sie an einem so guten und kostengünstigen Produkt interessiert sind, Bitte füllen Sie das folgende Formular aus und lassen Sie es uns noch heute wissen!

Füllen Sie meine aus Online-Formular.

Wunsch von Jade zum Internationalen Tag der Berufstätigen Frau 2021

Jade Staff Benefits on Women's Day

Alles Gute zum Tag der Frauen

Teilen Sie Glück und Dessert mit der Familie Jade!

Jadepumpenwerkstatt
Jade Manuelle Werkstatt
Jade Winding Workshop
Vorteile für Jade-Mitarbeiter
Vorteile für Jade-Mitarbeiter
Vorteile für Jade-Mitarbeiter
Vorteile für Jade-Mitarbeiter

Ab Juni 2020 bis jetzt, alle Jade-Mitglieder arbeiten hart, um dringende Bestellungen zu erhalten, du verdienst es!

Wünsche allen Jade-Kunden und Jade-Mitgliedern einen schönen Internationalen Tag der arbeitenden Frau!

Füllen Sie meine aus Online-Formular.

Jade bei PISCINE GLOBAL EUROPE 2018

Jade Booth auf der Lyon Pool Expo in Frankreich

GLOBALER EUROPA-POOL 2018

Lyon, Frankreich

Nach einem Treffen so viele Geschäftsleute in Lyon, Jade Umsatz fühlen sich erschöpft, aber sind wirklich begeistert, unsere Produkte zu sehen sind, so beliebt bei den Menschen in Europa!

Mehrere Kunden zweimal Jade Stand stehen und kommen oder mehr und einige sogar um sofort platziert. Wir schätzen das Vertrauen von ihnen!

Viele Kunden haben Angst vor Leckageproblem, jedoch, Jade hat noch nie dieses Problem gelöst, wie wir ein erfahrenes Ingenieur-Team haben, und sie wissen, wie die Pumpe besser ohne Leckage zu machen. Wir testeten auch drei Marken der Gleitringdichtung für mehr als 3 Monate, in denen wir die Entwicklung der ersten Pool-Pumpe, und verwenden Sie das Beste in unseren Produkten. Nach sechs Jahren Umsatz zu urteilen, unsere Entscheidung richtig ist und kein Kunde hat Beschwerde über jedes Leckageproblem. Wir sind zuversichtlich, dass Jade Produkte Erfolg in Europa sicher gewinnen!

Füllen Sie meine aus Online-Formular.

Schwimmbad & Wellness Barcelona Expo 2019

Katharina in der Piscina & Wellness Barcelona in Spanien

Ausstellung für Pool und Wellness in Barcelona 2019

Barcelona, Spanien

Jade Pumpe mit variabler Drehzahl auf der Barcelona Pool Expo in Spanien
Jade Booth auf der Barcelona Pool Expo in Spanien

Wir trafen einen strick zur Unterstützung der Unabhängigkeit Katalanisch jene Tage, Verkehr ist ziemlich schlecht, viele Kunden, um die Show zu kommen bestimmt waren auf dem Flughafen von Barcelona gehalten und einige gingen einen ziemlich langen Weg vom Flughafen zum Messe.

Wie auch immer, wir sind denen dankbar, die ihr Bestes versucht, uns auf der Pool-Show zu kommen gerecht zu werden, wir lieben Barcelona, Wir lieben unsere Kunden.

Füllen Sie meine aus Online-Formular.

Asien-Pool & Spa & Sauna Expo 2018

Jade Poolpumpe in Asien Sauna Spa Pool Expo in China

Asia Pool & Spa & Sauna Expo 2018

Guangzhou, China

Ich freue mich, so viele professionelle Pool-Geschäftsleute in China zu treffen.

Wir freuen uns, so viele ausgezeichnete Poolausrüstungen der chinesischen Marke zu sehen.

Das am meisten beeindruckte neue Produkt ist Schwimmstrom, der es den Menschen ermöglicht, in einem kleinen Pool oder sogar in einer Badewanne Schwimmübungen zu machen. Der Schwimmstrom sollte mit einer Umwälzpumpe funktionieren, die der Jade-Schwimmbadpumpe entspricht.

Wenn Sie Ihr Geschäft mit Schwimmstrom erweitern möchten, Möglicherweise benötigen Sie auch eine Jade-Schwimmbadpumpe, mit der Sie arbeiten können.

Ich hoffe, von Ihnen zu hören und in naher Zukunft zusammenzuwachsen!

Füllen Sie meine aus Online-Formular.

Jade in Barcelona Piscina Expo 2017

Jade-Poolpumpen und Sandfilter in Piscina & Wellness Barcelona in 2016

Barcelona Poolausstellung 2017

Barcelona, Spanien

2017 ist ein wichtiges & bedeutungsvolles Jahr für Jade, Wir kommen über diese Poolshow in Barcelona in den europäischen Markt. Wir sind zuversichtlich, dass unsere Produkte genauso beliebt werden wie in den USA.

Möchten Sie einer unserer Distributoren in Europa werden?

Füllen Sie das untenstehende Formular aus, um es uns mitzuteilen!

Füllen Sie meine aus Online-Formular.

Jade im Pool|Spa|Patio Expo 2016 in New Orleans, Louisiana,Vereinigte Staaten von Amerika

Jade im Pool|Spa|Patio Expo 2016 in New Orleans

Schwimmbad|Spa|Patio Expo 2016

New Orleans, Louisiana,Vereinigte Staaten von Amerika

Die Poolshow fand in dieser berühmten Stadt statt – New Orleans.

Mit unserem Prinzip:

Kein Unternehmen ist zu klein, Wir schätzen jede Gelegenheit.

Kein Problem ist zu groß, Wir kümmern uns um jeden Kunden.

Wir hoffen, Kunden aller Art bedienen zu können, egal ob groß oder klein, gewissenhaft oder unprofessionell, alle Jade-Mitarbeiter werden zu dir stehen.

Füllen Sie meine aus Online-Formular.

Jade im Pool|Spa|Patio Expo 2015

Jade im Pool|Spa|Patio Expo 2015

Schwimmbad|Spa|Patio Expo 2015

Las Vegas, Vereinigte Staaten von Amerika

Wir haben mit unseren aktuellen Kunden gesprochen, neue Kunden kennengelernt, Kommunikation mit anderen Teilnehmern usw., 2.5 Tage reichen uns nicht! Wir freuen uns schon auf die nächste Show…

Danke an alle unsere Kunden, Ihr Vertrauen hilft uns, so schnell zu wachsen!

Danke an alle potentiellen Kunden, zumindest geben Sie uns die Chance, in Zukunft mit Ihnen zusammenzuarbeiten, und wir sind sicher, es wird nicht lange dauern, bis Sie sich entscheiden, mit uns Geschäfte zu machen!

Danke an alle Teilnehmer, die wir in der Show getroffen haben, Wir freuen uns, so viele abwechslungsreiche Poolprodukte in der Poolbranche zu sehen und sind stolz darauf, die einzigartigen Besonderheiten in unseren Produkten zu finden, Wir hoffen, mit Ihnen langfristig für die gesamte Poolbranche tätig zu sein!

Füllen Sie meine aus Online-Formular.

Jade im Pool|Spa|Patio Expo 2014

Jade im Pool|Spa|Patio Expo 2014

Orlando, Florida, Vereinigte Staaten von Amerika

Variable Speed ​​Pump

ETL-zugelassene Poolpumpe mit variabler Drehzahl

Anweisung

Entwickelt in 2014, Diese Pumpe mit variabler Drehzahl ist eines der High-Tech-Produkte von Jade.

Glück für die Kunden, die das physische Objekt auf der Messe gesehen haben. Es spielt keine Rolle, ob Sie es nirgendwo gesehen haben, Muster ist jederzeit verfügbar und hier sind einige Anweisungen für Sie:

Handbuch: Geschwindigkeit1, Geschwindigkeit2, Geschwindigkeit3

Zeitplan: Zyklus1, Zyklus2, Zyklus3

Schnell reinigen: 3450 RPM

Es ermöglicht dem Benutzer, drei Geschwindigkeiten für den manuellen Modus und drei Zyklen für den Zeitplanmodus innerhalb von . einzustellen 24 Stunden von 450 U/min zu 3450 RPM.

Externer Controller-Modus auf Anfrage auch mit Modbus RS485 erhältlich.

Für mehr Details, Bitte teilen Sie uns dies unter info@jademotor.net mit oder füllen Sie das untenstehende Formular aus.

Füllen Sie meine aus Online-Formular.

Jade rein 2014 Kanton Messe

2014 Kanton Messe

Guangzhou, Guangdong, China

Hersteller von Poolpumpen

Unfertige Poolpumpe in der Jade-Werkstatt

Erinnerung

Dies ist die erste Messe, an der Jade jemals teilgenommen hat, ohne Schlüsselprodukt — Schwimmbadpumpe, Jade hat einige Kunden gewonnen, die in der Poolbranche ziemlich professionell sind.

Wir haben nicht viele Produkttypen, Jade konzentriert sich nur auf Schwimmbadpumpen, was uns in der Poolpumpenforschung sehr anerkannt macht.

Wir haben Poolpumpen für alle Pooltypen und -größen, Bitte teilen Sie uns mit, wenn Sie Interesse an Jade-Produkten haben.

Füllen Sie meine aus Online-Formular.

Was Sie über gewichteten Energiefaktor wissen, für Pool-Pumpen

Was Sie über gewichteten Energiefaktor wissen, für Pool-Pumpen

Updates auf Pool-Pumpe Änderungen

Als Pool-Besitzer, Sie wollen eine Energieeinsparung, umweltfreundliche Schwimmbad. Vielleicht möchten Sie einfach Ihre Energie- und Kosteneinsparungen vor dem Kauf eines Pool-Pumpe schätzen könnte. Glücklicherweise, Dies alles ist möglich mit dem neuen gewichteten Energiefaktor Schema! Die neuen gewichteten Energiefaktor Vorschriften aus dem Department of Energy (DAMHIRSCHKUH) wird es für Poolbesitzer noch einfacher. Hier ist, was Sie wissen sollten.

Was ist gewichtete Energiefaktor (WEF)?

WEF Ratings sind sehr ähnlich wie wir die Effizienz eines Autos in Meilen pro Gallone messen (MPG). Eine WEF Bewertung ermöglicht es Ihnen, die Energieeffizienz verschiedenen Pools zu sehen und vergleichen Pumpen, so dass Sie eine fundierte Entscheidung treffen können, wenn Einkauf. Je höher die WEF Bewertung, desto effizienter ist die Pumpe.

Wann geschieht diese Änderung?

Bis Juli 19, 2021, alle neu hergestellten Pool-Pumpen, die unter der neuen Regel enthalten sind, müssen mit ihren WEF Bewertung geprüft und gekennzeichnet werden.

Was bedeutet das für Poolbesitzer?

Durch eine WEF Bewertung Gründung, Ihr Pool-Pumpe das Einkaufen noch einfacher. Sie werden nun die Werkzeuge leicht zu bewerten und vergleichen, wie effizient neue Pumpen sind. Im Gegenzug, dies wird Ihnen helfen, die Energie reduzieren Sie verbrauchen Ihren Pool laufen, in vielen geringeren monatlichen Energierechnungen ergebenden.

Durch |7. Februar, 2020|Allgemein

Was macht diese Mittel für die Pool-Pumpe Händler?

Gut, warum beeilen Sie sich nicht für eine kosteneffiziente und energieeffiziente Pumpe mit variabler Drehzahl zu suchen und einen Löffel von dieser Gelegenheit ergreifen!

Hier ist eine gute Wahl für Sie!

Jade-Pumpe mit variabler Geschwindigkeit Verkauft für 238 bis 338 US-Dollar

Für mehr Details, kontaktieren Sie uns bitte unter info@jademotor.net

Warum benötige ich eine Pumpe mit variabler Drehzahl

Warum benötige ich eine Pumpe mit variabler Drehzahl?

Sie können Antworten in diesem Blog finden:

Pumpe mit variabler Drehzahl auf saisonalen Pool

Hier einige Zusammenfassung des Artikels

Sie fragen sich, ob es sich lohnt, eine Pumpe mit variabler Drehzahl zu erhalten, wenn Sie in einem Gebiet leben, wo Sie Pool ist nicht das ganze Jahr geöffnet? Das ist ein Argument, dass ich sehe angehoben wird, wenn ich ein Video oder Artikel spricht über die Vorteile des Erhaltens einer variablen Geschwindigkeit Pool-Pumpe Post. Früher war der häufigste Einwand, dass „ich meine Pumpe nur ein paar Stunden pro Tag betreiben“, was bedeutet, dass eine Pumpe mit variabler Drehzahl unter diesen Umständen keine Einsparungen hätte. Als Antwort auf diesen Einwand schrieb ich einen Artikel, dass bricht diesen Vergleich zu zeigen, dass Pumpen mit variabler Drehzahl sind besser auch unter diesem extremen Filtration Beispiel. Sie können das Video ansehen und diese detaillierte Aufschlüsselung in diesem Artikel über sehen läuft eine Pool-Pumpe 4 Stunden pro Tag.

Wie in diesem Artikel gezeigt Pumpe für noch ein paar Stunden bei maximaler Geschwindigkeit laufen wird mehr Energie als eine richtig geplant Pumpe mit variabler Drehzahl verwenden. Der Rückgang des Stromverbrauches, wie Sie die Drehzahl des Motors zu reduzieren, ist so bedeutend, es Stromkosten für die Filtration auf Pools reduzieren kann, die selbst den spärlichen Filtrations Zeitplan. Dies führt mich zu dem Punkt dieses Artikels, dass ist es üblich, die Leute sagen, dass saisonale Pools zu sehen, werden nicht so viel profitieren von variabler Geschwindigkeit als Pools in einer ganzjährig Umgebung angeordnet Pumpen. Ich glaube, das ist eine Frage der Perspektive und Pumpen mit variabler Drehzahl sind genauso wichtig auf saisonale Pools, wie sie auf das ganze Jahr über Pools sind.

Pumpe mit variabler Drehzahl Kosten – Der erste zu klärende Punkt ist, dass Poolbesitzer oft sagen, dass eine Pumpe mit variabler Drehzahl kostet $1000(Jade Pumpe mit variabler Drehzahl Kosten weit unter diesem Betrag, Anfrage absenden den neuesten Preis zu bekommen) so, wie lange dauert es, bis diese Kosten wieder hereinzuholen? Mein Problem mit dieser Aussage ist, dass es völlig ignoriert, dass Single-Speed-Pumpen sind nicht frei. Sie benötigen eine Pool-Pumpe, egal was und selbst wenn eine Pumpe mit variabler Drehzahl mehr Geld als eine Single-Speed-Pumpe ist zu kaufen, es ist der Unterschied zwischen diesen beiden Zahlen, die Sie mit betroffen werden sollen, wenn dieser Vergleich. Es ist auch erwähnenswert, dass die Kosten für die variable Geschwindigkeit in der Regel Pumpen stetig wurde reduziert, da sie den Markt ein Jahrzehnt treffen vor. Während einige der größeren und teureren Modelle sind deutlich über $1000 kaufen, diese würden auch zu sehr hohen Ende und ausgefallene Pools mit vielen Funktionen entsprechen, dass Bedarf von der Pumpe ausgeführt werden. Teure Pools müssen teure Pumpen und dies sollte eine Überraschung niemand sein. Auf der Eingangsebene des Marktes gibt es jetzt viele Pumpen mit variabler Drehzahl, die weit weniger sind als $1000 kaufen. Ein Beispiel hierfür wäre die Pentair Superflo VS Pumpe sein, die ist (zum Zeitpunkt des Schreibens) zum Verkauf auf Amazon für $729 wo die Single-Speed-Version dieser Pumpe ist $428 nur die Mittel der Preisunterschied ist $301 und nicht $1000 oder mehr Dollar.

So, jetzt fragen wir die richtigen Fragen, wie wird eine saisonale Pool Geld sparen mit einer Pumpe mit variabler Drehzahl, Zumindest genug, um sich zu versöhnen der Unterschied im Preis zwischen einer Ersatzpumpe mit einer Drehzahl und einer neuen Pumpe mit variabler Drehzahl. Meine Haltung ist, dass eine Pumpe mit variabler Drehzahl in jeder Hinsicht genauso wichtig für die saisonale Pools ist, wie sie für Pools sind, die das ganze Jahr über betrieben werden. Das einzige Zugeständnis, zu dem ich bereit wäre, ist, dass es dauern wird länger die Kosten für eine Pumpe mit variabler Drehzahl in einem saisonalen Pool als für einen Pool, in dem die Pumpe betrieben wird, wieder hereinzuholen 365 Tage pro Jahr. That being said Pool-Pumpen für bewertet werden 60 monatigem Betrieb von Herstellern. Ein Pool in einem saisonalen Bereich könnte nehmen 10 Jahre oder mehr zu erreichen 60 monatigem Betrieb, wo das ganze Jahr hindurch Pool könnte, dass die Lebensdauer Erwartung in die Hälfte dieser Zeit erreichen.

EIN 25,000 Gallone Pool in einem kalten Klima Bereich von Kanada und einem 25,000 Gallone Pool in Florida beide eine ähnliche Menge an Filtration erfordern, wie mit dem Industriestandard von drei bis vier Umsätzen eines Pool Wesen etabliert erforderlich jeder 24 Std.. Dies bedeutet, dass ein Upgrade auf eine Pumpe mit variabler Drehzahl wird das Potenzial hat, die genau die gleiche Menge an Strom für diese beiden Pools zu sparen. Wie von den Herstellern von VS gezeigt Pumpen, und aus Artikeln wie diesem über wie viel Macht hat einen Pool-Pumpe Gebrauch, Pools mit einzelnen Pumpen können durch so viele elektrische Nutzung reduzieren 80% zu 90%. Dabei spielt es keine Rolle, wo der Pool befindet, oder wie viele Monate im Jahr der Pool betreibt, jeder Pool hat die gleiche Fähigkeit von Upgrade auf eine energiesparende Pumpe mit variabler Drehzahl profitieren.

Beide saisonalen und ganzjährig Pools profitieren von Pumpen mit variabler Drehzahl – Auch wenn es länger dauert, bis ein Pool in einem kälteren Klima die Investition in die Pumpe mit variabler Drehzahl amortisiert hat, eine Pumpe, die nur noch in Betrieb nach einer Pumpe in einem Klima der ganze Jahr hat das Ende seiner Lebensdauer und erforderlichen Ersatz lang wird die Hälfte für das Jahr oder weniger arbeitet erreicht. Natürlich ist das alles ein strittiger Punkt, da ab Juli 18, 2021 es wird Gesetz für alle Pools eine Pumpe mit variabler Drehzahl für die Filterpumpe haben (oder eine Pumpe, die einen Wirkungsgrad Anforderung erfüllt, dass zur Zeit nur durch variable Geschwindigkeit erfüllt werden Pumpen). Das bedeutet, wenn Ihre aktuelle Pumpe ausfällt werden Sie Ihre Pumpe ein Upgrade erforderlich. Dies ist keine Bewegung Sie Geld für Strom zu sparen. Die Tatsache, dass Sie eine erhebliche Menge an Strom sparen ist sekundär zu dem Punkt der Eliminierung verschwenderischer, Energie hog Geräte, die bessere Option verfügbar. Denken Grün beginnt zu Hause, und argumentiert gegen Pumpen mit variabler Drehzahl zeigt, dass Sie nicht die Mathematik an der elektrischen Einsparpotential getan haben, und refute Veränderungen, die zweifellos die Energiebilanz besitzen einen Pool verbessern. Pumpen mit variabler Drehzahl sind nützlich, auf jedem Schwimmbad, die derzeit eine einzige Geschwindigkeit Pumpe hat, unabhängig davon, wo das Pool befindet, und wie viele Monate pro Jahr erhalten Sie es zu verwenden.